POWER UNIT FOR AERIAL WORKING PLATFORM
Product Description
This power unit is specially designed for aerial Working Platform,Hydraulic Power Unit For Warehousing, providing it with lifting and descending function,Energy Hydraulic Valve Parts, the quantitative pressure compensating throttle valve can make the platform descend steady.
Model Specifications
Type 型号 | Motor 电机 | Pump Displacemen t 泵排量(cc/r) | Tank Capacit y 油箱容积(L) | Pressure 压力 (MPa) | Mounting 安装方式 | Oil Port 油口尺寸 |
HPU2-89GKDHEHCFF(Y)A | AC220V 0.75Kw 1440rpm 50Hz | 1.6 | 4 | 18 |
Horizontal 卧式 | G1/4" |
Hydraulic Power Unit For Warehousing
Special Notes
1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.
2、 If you need manual oil discharge device for emergency , please specify when ordering.
3、 This power unit can not run continuously (1 min ON,9 min OFF), it can work repeatedly.
4、 Before installation, ensure that the hydraulic components such as the oil cylinder,oil pipe and joints are clean and free from any impurities.
5、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.
6、 This hydraulic power unit is suitable for horizontal installation.
7、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
8、 The hydraulic oil should be replaced after the first 100 hours* use of the system, and change the oil every 3,000 hours after that.
Contact us if you need more details on Flow Control Valves. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Power Unit Hydraulic Cylinder、Hydraulic Power Pack Elevator. If these products fail to match your need, please contact us and we would like to provide relevant information.Product Categories : Old Products